Power supply for magnetic slim track light system VIDEX VL-TRMS-P100B 100W
Gyártói elnevezés:
Power supply for magnetic slim track light system VIDEX VL-TRMS-P100B 100W
Power supply for magnetic slim track light system VIDEX VL-TRMS-P100B 100W is a power source for the LED magnetic track lighting system. The product is intended for use as an external general power supply for VIDEX LED light sources of the VL-TRMS-****** series.
INSTALLATION AND CONNECTION INSTRUCTIONSRead the instructions before installation. The product can be installed either directly onto VL-TRMS-FT**** series tracks or remotely using additional accessories that can be purchased separately. Please perform installation and connection according to the wiring diagram provided in the instructions.
WARNING! Installation of the power supply unit and track system must be carried out by a qualified specialist. All installation and connection work must be performed with the power switched off.- The total power of the LED light sources connected to one power supply unit must not exceed its maximum output power.- The maximum track length must not exceed 15 meters!
After installing the power supply unit and tracks, the corresponding light sources can be mounted onto the track. Before first use, check the correctness of mechanical installation and electrical connection. The product may only be used in a network that meets the energy requirements and quality standards established by law.
FUNCTIONAL CHARACTERISTICSThis product is intended for indoor use only. The device has no moisture protection (IP20). The power supply unit is not suitable for dimming light sources. Rated service life — 30 000 hours. Number of switching cycles before failure — 20 000 (ON/OFF). Protection class against electric shock — Class II. The power supply unit operates independently of the light source. It is equipped with a transformer protected against short circuits. The product contains no harmful substances. The shelf life before first use is unlimited.
MAINTENANCE AND SAFETY INSTRUCTIONSAll maintenance work must be carried out with the power switched off and after the device has cooled down. Do not cover the power supply unit with thermal insulation materials; ensure free air circulation. Clean only with soft and dry cloths. Do not use chemical cleaning agents. The device must be powered only by the rated voltage or a voltage within the specified range. Do not use the product with damaged wiring or connection points.
WARNING! Do not attempt to repair or disassemble the product, as this may impair its functionality and void the warranty. The product must not be used in adverse conditions, such as dust, water, moisture, vibration, explosive atmosphere, fumes, or chemical vapors. A used or damaged product must be disposed of in accordance with applicable regulations.
Failure to follow these rules may result in fire, burns, electric shock, bodily injury, and other material or immaterial damage. The manufacturer is not liable for any damage caused by non-compliance with the above instructions. Warranty is 3 years.
INSTALLATION AND CONNECTION INSTRUCTIONSRead the instructions before installation. The product can be installed either directly onto VL-TRMS-FT**** series tracks or remotely using additional accessories that can be purchased separately. Please perform installation and connection according to the wiring diagram provided in the instructions.
WARNING! Installation of the power supply unit and track system must be carried out by a qualified specialist. All installation and connection work must be performed with the power switched off.- The total power of the LED light sources connected to one power supply unit must not exceed its maximum output power.- The maximum track length must not exceed 15 meters!
After installing the power supply unit and tracks, the corresponding light sources can be mounted onto the track. Before first use, check the correctness of mechanical installation and electrical connection. The product may only be used in a network that meets the energy requirements and quality standards established by law.
FUNCTIONAL CHARACTERISTICSThis product is intended for indoor use only. The device has no moisture protection (IP20). The power supply unit is not suitable for dimming light sources. Rated service life — 30 000 hours. Number of switching cycles before failure — 20 000 (ON/OFF). Protection class against electric shock — Class II. The power supply unit operates independently of the light source. It is equipped with a transformer protected against short circuits. The product contains no harmful substances. The shelf life before first use is unlimited.
MAINTENANCE AND SAFETY INSTRUCTIONSAll maintenance work must be carried out with the power switched off and after the device has cooled down. Do not cover the power supply unit with thermal insulation materials; ensure free air circulation. Clean only with soft and dry cloths. Do not use chemical cleaning agents. The device must be powered only by the rated voltage or a voltage within the specified range. Do not use the product with damaged wiring or connection points.
WARNING! Do not attempt to repair or disassemble the product, as this may impair its functionality and void the warranty. The product must not be used in adverse conditions, such as dust, water, moisture, vibration, explosive atmosphere, fumes, or chemical vapors. A used or damaged product must be disposed of in accordance with applicable regulations.
Failure to follow these rules may result in fire, burns, electric shock, bodily injury, and other material or immaterial damage. The manufacturer is not liable for any damage caused by non-compliance with the above instructions. Warranty is 3 years.
* A termékleírás tájékoztató jellegű, és automatikusan fordított szöveget is tartalmazhat. A képek illusztrációk, a pontos adatokért kérjük, ellenőrizze a gyártói adatlapot.
Csomagajánlatok
